Knurl Holders

Bump Knurl Holders

Self Centering Bump Holders

Straddle Type

2 Die End Rolling

3 Die End Rolling

Conical Knurling

Taper Knurling Holders

Face Knurling

Shank Conical Knurling Dies

Internal Knurling

Cut Type Knurling

Compact Self-Centering Three Die Holder with Synchronized Adjustment - Inch

COMPACT SELF-CENTERING 3 DIE HOLDER with SYNCHRONIZED ADJUSTMENT

HOLDERS WITH "INCH" SHANKS
Below dimensions are in "inches"
HOLDER
KNURL 
SERIES
PIN
HOLDER DIMENSIONS (in)
PRICE*
CAPACITY
A
B
C
D (Shank)
Ø .08 - .40 (up to 1.34" length)
Ø .08 - .24 (infintite length)
2.97
1.00
1.73
0.50"
$1,234
MR / MRV
Ø .16-1.20 (up to .4" length)
Ø .16-.80 (up to .8" length)
Ø .16-.55 (up to 2.4" length)
Ø .16-.24 (infinite length)
5.31
2.36
2.76
0.75"
$1,375
MR / MRV
Ø .16-1.20 (up to .4" length)
Ø .16-.80 (up to .8" length)
Ø .16-.55 (up to 2.4" length)
Ø .16-.24 (infinite length)
5.31
2.36
2.76
1.00"
$1,375

Knurl head for knurling small diameter components. Fitted with three jaws arranged at 120º which can be adjusted simultaneously by means of a synchronizing ring. This tool has a built-in mechanism that compensates any misalignment between the chuck and turret centerlines. Recommended for use on CNC, automatic, multi-spindle lathes and others.

  If you do not see what you are looking for - please call.

*** Pricing and Discount structure are subject to change without notice.


Accu Trak Knurling Tools are manufactured to extremely high standards from premium alloys. Many are available with a lapped tooth form to give longer life and impart a smooth, clean surface to the knurled part. Both sides and the bore of the knurl are finish ground to maintain close tolerance on diameter and side runout. Our standard material is a high quality grade of High Speed steel which is vacuum hardened, and tempered at least 2 times to a hardness of about 63 Rockwell C.

For severe knurling operations, such as rolling on 303 stainless or semi-hardened steels, Accu Trak also offers knurls in a premium grade of high-cobalt steel. These knurling tools are slightly harder and in most applications deliver a substantial increase in tool life. Multiple coatings such as "TiN" and "Ferritic Nitrocarburizing" are also available if necessary. Our sales representatives will be happy to discuss any aspect of your knurling application and make recommendations on maximizing tool life versus cost for any type of knurling operation.

In addition to the many stock knurling dies shown above, we can manufacture virtually any size and pitch special knurling tools with 1-2 week normal delivery for standard knurl tooth forms.